HR Tested Fit and Function
2018+ Jeep Wrangler (JL) Front Turn Signal UpgradeX.18JLLEDFRTTRN-SWITB
[ In Stock: pieces ]
Starting at $X.XX/month with
Designed for Sport models only!
The original amber front turn signal bulb in the 2018+ Jeep Wrangler JL is an old-style incandescent bulb that gives your headlight an outdated golden glow. With all the modern updates done to the Jeep, the old style front blinker stands out like a sore thumb. This kit gives you everything you need in order to convert your old amber halogen bulb into a new amber high-power LED bulb. This bulb looks better inside your headlight when turned off, giving it a more sleek and futuristic look, it's brighter when turned on, and gives you that desired instant-on-instant-off operation like the other LED lights on your vehicle. The LED bulbs included in this kit are plug-and-play for the 2018+ Jeep JL. The bulbs in this kit are white/amber Switchback, so the DRL will be white and switch to amber when the turn signal is used. This kit now ships with the brighter and better looking Armor Series LED Bulbs.
This white/amber "switchback" bulb gives you a cool white "DRL" look.
2 7440/7443 Armor Series LED Bulbs Switchback (white/amber)
2 7.5 Ohm Resistors with wires on each side
4 T-Tap Connectors
2 Self-Tapping Screws
Constant Current Driver:
The Armor Series of LED bulbs from GTR Lighting are built using a state of the art Constant Current Driver inside the bulb. This allows them to be more reliable when used on vehicles that have voltage fluctuations due to electrical system design or fault. A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage/current reaches the LED. This helps the LED bulb last longer than bulbs that don't have this device built in.
XenonDepot XD7.5 Resistors
When installing LED bulbs to replace your factory blinker bulbs, you will have a "fast flash" or "hyperflash" problem. This means the vehicle will think you have a light bulb burnt out and, as an indicator to you, will flash quicker than normal. Installing these resistors will fool your vehicle into thinking it has a light bulb in good condition installed and will blink normally. Simply wire the resistor between the ground wire and the blinking positive wire.
Specifications Per Bulb:
Overall Length: 2.06"
Bulb Diameter: 0.80"
Dim Circuit Wattage: 0.8 Watts
Dim Circuit Amp Draw: 57mA @14vdc
Bright Circuit Wattage: 4.7 Watts
Bright Circuit Amp Draw: 334mA @14vdc
Raw Lumen: 750
Effective Lumen: 600
BULBS: 2x (One Pair)
WARRANTY: 2 Years
JEEP WRANGLER (JL): 2018+ w/ Stock Incandescent Turn Signals
INTENSITY: Up to 100% over stock
RELIABILITY: Better than stock
LONGEVITY: 2-10 Years (based on use)